Yamaha 350HP F350ESA2 White DEC Outboard – 35″ Shaft
The white 350-horsepower Yamaha F350ESA2 DEC outboard uses a 35-inch shaft for compatible high-transom installations. Its electronic controls support accurate operation, while the engine’s power provides substantial thrust for offshore cruising, fishing, and heavy-load marine applications.
Description
SET
Yamaha 350HP F350ESA2 White DEC Outboard Specs
| Brand | Yamaha Marine |
| Full Model Code / Part Number | F350ESA2 (White / Standard Rotation / 35" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke V8 (60° V8, DOHC 32-Valve) |
| Horsepower Output (HP / kW) | 350 HP (257 kW) |
| Displacement (cc / cu in) | 5330 cc (325 cu in) |
| Bore x Stroke (mm / in) | 94.0 x 96.0 mm (3.70 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Electronic Fuel Injection (EFI) - Multi-Point Sequential |
| Ignition System | TCI Microcomputer |
| Starting System | Electric Start (Digital Electronic Control) |
| Steering System | Digital Electronic Control (DEC) / Compatible with Remote Steering |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.73:1 (Forward - Neutral - Reverse) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXXL: 35 inches |
| Alternator / Charging Output (Amps / Watts) | 50 Amp (Maximum) / 630 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 89 Octane Recommended) / Yamalube 4M FC-W 10W-30 |
| Dry Weight (kg / lbs) | 365 kg / 804 lbs |
| Standard Warranty | 3 Years Limited Pleasure Boat Warranty |
Common Question of Yamaha F350ESA2 White
Is the white F350ESA2 DEC?
Yes. The white Yamaha F350ESA2 is identified with DEC Digital Electronic Control and a 35-inch shaft. The white finish identifies exterior color, while exact fuel-system and control components require confirmation. Verify harnesses, gauges, battery, steering, transom strength, and package contents before installing this high performance outboard motor.
What shaft length does it use?
The shaft length is 35 inches, intended for a matching extra-tall transom. Measure the boat according to Yamaha’s instructions before mounting because incorrect shaft length can affect cooling-water pickup, gearcase clearance, propeller immersion, steering response, and trim. Correct measurement supports this ready to bolt marine installation.
Does the white finish change performance?
No. The white finish changes exterior appearance rather than the listed horsepower or shaft length. Confirm DEC controls, wiring, gauges, battery requirements, steering equipment, fuel system, engine weight, and package contents through Yamaha documentation before installation.
Reviews
There are no reviews yet.