Yamaha 200HP F200LD 4-Stroke Outboard – 20″ Shaft
The 200-horsepower Yamaha F200LD four-stroke outboard uses a 20-inch shaft for compatible lower-transom installations. Its four-stroke propulsion supports dependable cruising and fishing, while proper shaft length helps maintain propeller placement and predictable handling.
Description
SET
Yamaha 200HP F200LD 4-Stroke Outboard Motor Specs
| Brand | Yamaha Marine |
| Full Model Code / Part Number | F200LD (Standard Rotation / Mechanical / 20" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke Inline 4 (DOHC 16-Valve with VCT) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 2785 cc (170 cu in) |
| Bore x Stroke (mm / in) | 96.0 x 96.0 mm (3.78 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Electronic Fuel Injection (EFI) |
| Ignition System | TCI Microcomputer |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Forward - Neutral - Reverse) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 50 Amp (Maximum) / 630 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 89 Octane Recommended) / Yamalube 4M FC-W 10W-30 |
| Dry Weight (kg / lbs) | 221 kg / 487 lbs |
| Standard Warranty | 3 Years Limited Pleasure Boat Warranty |
Common Question of Yamaha F200LD
Is F200LD a four-stroke?
Yes. The Yamaha F200LD is identified as a 200-horsepower four-stroke outboard with a 20-inch shaft. Confirm the exact fuel system, controls, steering, battery, wiring, fuel supply, and package contents before installation. Correct boat matching supports reliable propulsion from this high performance outboard motor.
What shaft length does it use?
The shaft length is 20 inches, intended for a matching transom height. Measure the boat before purchase because incorrect shaft length can affect cooling-water pickup, gearcase position, propeller immersion, steering response, and trim. Proper measurement supports this ready to bolt marine installation.
What boats fit this model?
Boats designed for a 20-inch transom and rated for 200 horsepower are the intended application. Verify transom strength, engine weight capacity, steering equipment, controls, fuel supply, battery, wiring, mounting hardware, and hull limitations before repowering.
Reviews
There are no reviews yet.