Tohatsu 250HP BFT250DURA 4-Stroke Outboard – 30″ Shaft
The 250-horsepower Tohatsu BFT250DURA four-stroke outboard uses a 30-inch shaft for compatible transoms. Its four-stroke propulsion supports demanding cruising and fishing, while the shaft dimension helps maintain propeller depth and effective thrust transfer.
Description
SET
Tohatsu 250HP BFT250DURA 4-Stroke Outboard Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT250DURA (Standard Rotation / Mechanical / 30" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXL: 30 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 287 kg / 633 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT250DURA
Is BFT250DURA a four-stroke?
Yes. The Tohatsu BFT250DURA is identified as a 250-horsepower four-stroke outboard with a 30-inch shaft. Confirm the exact fuel system, controls, steering, battery, wiring, fuel supply, and package contents before installation. Correct boat matching supports reliable propulsion from this high performance outboard motor.
What transom fits its shaft?
A 30-inch transom is the intended match for this BFT250DURA model. Measure the hull according to Tohatsu’s instructions before mounting because incorrect shaft length can affect cooling-water pickup, gearcase depth, propeller immersion, steering response, and trim. Correct measurement supports this ready to bolt marine installation.
What should buyers verify?
Verify horsepower suitability, engine weight, transom height, steering hardware, controls, battery capacity, wiring, fuel supply, gauges, and package contents. The supplied title does not specify EFI, so confirm the fuel system with Tohatsu documentation before repowering or operating this four-stroke powerhead.
Reviews
There are no reviews yet.