Tohatsu 250HP BFT250DLRA 4-Stroke Outboard – 20″ Shaft
The 250-horsepower Tohatsu BFT250DLRA four-stroke outboard uses a 20-inch shaft for compatible lower-transom boats. Its propulsion output supports cruising and fishing, while proper shaft matching helps maintain propeller depth and efficient thrust transfer.
Description
SET
Tohatsu 250HP BFT250DLRA 4-Stroke Outboard Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT250DLRA (Standard Rotation / Mechanical / 20" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 279 kg / 615 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT250DLRA
Is BFT250DLRA a four-stroke?
Yes. The Tohatsu BFT250DLRA is identified as a 250-horsepower four-stroke outboard with a 20-inch shaft. Confirm the exact fuel system, controls, steering, battery, wiring, fuel supply, and package contents before installation. Correct boat matching supports reliable propulsion from this high performance outboard motor.
What transom fits its shaft?
A 20-inch transom is the intended match for this BFT250DLRA model. Measure the hull according to Tohatsu’s instructions before mounting because incorrect shaft length can affect cooling-water pickup, gearcase depth, propeller immersion, steering response, and trim. Correct measurement supports this ready to bolt marine installation.
Does it use fuel injection?
Confirm the exact fuel system before making an EFI claim. The supplied title identifies a 250-horsepower four-stroke outboard but does not explicitly state fuel injection. Verify controls, wiring, battery, steering equipment, fuel supply, gauges, engine weight, and transom requirements through Tohatsu documentation.
Reviews
There are no reviews yet.