Tohatsu 200HP BFT200DLRA 4-Stroke Outboard – 20″ Shaft
With 200 horsepower, four-stroke operation, and a 20-inch shaft, the Tohatsu BFT200DLRA supports compatible lower-transom installations. Its propulsion output suits cruising and fishing, while correct shaft length helps maintain predictable handling and thrust delivery.
Description
SET
Tohatsu 200HP BFT200DLRA 4-Stroke Outboard Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT200DLRA (Standard Rotation / Mechanical / 20" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 279 kg / 615 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT200DLRA
Is BFT200DLRA a four-stroke?
Yes. The Tohatsu BFT200DLRA is identified as a 200-horsepower four-stroke outboard with a 20-inch shaft. Confirm the exact fuel system, controls, steering, battery, wiring, fuel supply, and package contents before installation. Correct boat matching supports reliable propulsion from this high performance outboard motor.
What transom fits its shaft?
A 20-inch transom is the intended match for this BFT200DLRA model. Measure the hull according to Tohatsu’s instructions before mounting because incorrect shaft length can affect cooling-water pickup, gearcase depth, propeller immersion, steering response, and trim. Correct measurement supports this ready to bolt marine installation.
What should buyers verify?
Verify horsepower suitability, engine weight, transom strength, shaft length, steering hardware, controls, battery capacity, wiring, fuel supply, gauges, and package contents. The supplied title does not specify EFI, so confirm the fuel system with Tohatsu documentation before repowering or operating the four-stroke powerhead.
Reviews
There are no reviews yet.