Tohatsu 150HP BFT150DXCRA Counter Rotation Outboard – 25″ Shaft
With 150 horsepower, counter-rotation operation, and a 25-inch shaft, the Tohatsu BFT150DXCRA supports compatible twin-engine boats. Counter-rotation helps balance thrust, while the shaft dimension supports proper propeller placement and predictable handling.
Description
SET
Tohatsu 150HP BFT150DXCRA Counter Rotation Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT150DXCRA (Counter Rotation / Mechanical / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke DOHC 16-Valve Inline 4 (VTEC) |
| Horsepower Output (HP / kW) | 150 HP (110 kW) |
| Displacement (cc / cu in) | 2354 cc (144 cu in) |
| Bore x Stroke (mm / in) | 87.0 x 99.0 mm (3.43 x 3.90 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.14:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 40 Amp (Total / 30 Amp Battery Charging) / 480 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 225 kg / 496 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT150DXCRA
Is BFT150DXCRA counter rotating?
Yes. The Tohatsu BFT150DXCRA is specified as a counter-rotation 150-horsepower outboard with a 25-inch shaft. Its counter rotating lower unit is intended for compatible paired-engine applications. Confirm propeller specification, engine pairing, controls, steering equipment, battery requirements, and boat compatibility before installing this high performance outboard motor.
What transom fits its shaft?
A 25-inch transom is the intended match for this DXCRA model. Measure the hull according to Tohatsu’s instructions before mounting. Correct shaft positioning supports cooling-water pickup, gearcase clearance, propeller immersion, steering response, and balanced twin-engine operation. Accurate measurement supports this ready to bolt marine installation.
Does it use fuel injection?
Confirm the exact fuel system before making an EFI claim. The supplied title identifies counter rotation but does not specify fuel injection. Verify fuel-system details, controls, wiring, battery, gauges, steering equipment, propeller requirements, and mounting components with Tohatsu documentation before installation.
Reviews
There are no reviews yet.