Raymarine Type 3 Hydraulic Linear – 12V
Operating at 12 volts, the Raymarine Type 3 Hydraulic Linear drive provides direct hydraulic steering assistance for compatible autopilot systems. Its linear format supports controlled rudder movement, helping maintain course while reducing manual steering effort on installations requiring higher-capacity drive equipment.
RAYMARINE Type 3 Hydraulic Linear - 12V Specifications
| Drive Type | Heavy-Duty Hydraulic Linear Actuator |
| Pump/Ram Capacity | Self-Contained Hydraulic System |
| Flow Rate / Speed | 12 Seconds (Full Stroke Span) |
| Max Pressure | 2,200 lbs (1,000 kg) Peak Thrust |
| Cylinder Compatibility | Large Vessels up to 77,000 lbs (35,000 kg) |
| Operating Voltage | 12V DC System |
| Peak Current Draw | 30 Amps Maximum Load |
| Average Power Draw | 8A - 15A Typical Heavy Sailing |
| Motor Type | High-Torque Integrated DC Pump |
| Computer Compatibility | ACU-400 / NAC-3 / AC42 |
| Port Size / Thread | No External Hoses (Sealed Unit) |
| Drive Connection | Tiller Arm / Quadrant Pin |
| Rotation/Stroke Direction | Linear Push-Pull Extension |
| Mounting Type | Fixed Pivot Foot Bracket |
| Housing Material | Corrosion-Resistant Cast Alloy |
| Waterproof Rating | IPX6 Marine Protected Unit |
| Operating Temperature | -15°C to +60°C Extreme Performance |
| Length (Overall) | 300 mm (12") Stroke Length |
| Width/Diameter | Industrial Scale Heavy Chassis |
| Weight | 12.0 kg (26.5 lbs) |
| Included Accessories | Mounting Pin, Clevis, Hardware |
| Key Mechanical Feature | Combines pump and ram into one zero-loss unit |
Common Question of Raymarine Type 3 Hydraulic
What is the Type 3 Hydraulic?
The Raymarine Type 3 Hydraulic Linear is a 12V autopilot drive for compatible hydraulic steering systems. It moves the steering mechanism under autopilot control. Confirm cylinder volume, hydraulic fittings, hoses, pump, control unit, battery, and hydraulic autopilot system compatibility before installation.
What voltage does it use?
It uses 12 volts according to the product listing. Confirm battery capacity, cable gauge, fuse or circuit breaker, current draw, polarity, grounding, hydraulic connections, and control-unit requirements before wiring.
Is it an anchor windlass?
No. The Type 3 Hydraulic Linear drive controls steering and does not handle chain, rope, gypsy, or anchor drums. It is not an anchor windlass component. Verify separate equipment for marine anchor retrieval.
Related products
Reviews
There are no reviews yet.