Maxwell HRC-8 Free Fall 12v Horizontal Windlass for 5/16″ Chain & 9/16″ Line
The 12-volt Maxwell HRC-8 uses free-fall operation for 5/16-inch chain and 9/16-inch line. Rapid anchor release simplifies deployment, while powered retrieval brings the compatible rode aboard with less physical strain, helping crews complete routine anchoring procedures more efficiently.
Description
SET
Maxwell HRC-8 Free Fall Specs
| Brand | Maxwell |
| Full Model Code / Part Number | HRC-8 Free Fall (P104382) |
| Country of Origin | New Zealand |
| Windlass Type / Orientation | Horizontal, Free Fall |
| Power Supply / Drive System | 12V DC |
| Motor Wattage / Rating | 600W |
| Maximum Pull / Breakaway Power | 410 kg / 900 lbs |
| Working Load / Continuous Pull | 100 kg / 220 lbs |
| Max Retrieval Speed | 33 m/min (108 ft/min) |
| Chain Gypsy Size & Standard | 5/16" (8mm) Short Link / HT |
| Rope Size Capability | 9/16" (14 mm) 8-Plait |
| Capstan / Drum Option | No |
| Material & Finish | Pressure Coated Marine-Grade Die-Cast Aluminum |
| Current Draw / Circuit Breaker Rating | 80 Amps |
| Deck Thickness Range | 20 - 45 mm |
| Net Weight | 11.5 kg / 25.3 lbs |
| Included Switchgear / Control System | Dual Direction Solenoid, Circuit Breaker, Rocker Switch |
| IP Rating | IP66 |
| Standard Warranty | 3 Years |
| Application | Boats up to 10m (33ft), max displacement 5,000 kg, target anchor weight up to 13 kg |
Common Question of Maxwell HRC8
What chain and line fit?
The Maxwell HRC-8 is listed for 5/16-inch chain and 9/16-inch line. Confirm chain grade, link profile, rope construction, splice, battery capacity, breaker rating, deck hardware, and anchor rode compatibility before installation for reliable marine anchor retrieval.
Does it have free fall?
Yes. The HRC-8 is identified as a free-fall horizontal windlass. Confirm clutch adjustment, brake operation, control wiring, chain stopper use, deck clearance, and recovery procedures before deployment. Free-fall operation still requires correct installation and safe handling practices.
What voltage does it use?
The Maxwell HRC-8 is specified as a 12V windlass. Confirm battery capacity, cable gauge, circuit breaker, switch arrangement, grounding, and motor current before wiring. Correct electrical protection supports dependable operation of this electric anchor windlass.
Reviews
There are no reviews yet.