Honda 250HP BF250DURA 4-Stroke Outboard – 30″ Shaft
The 250-horsepower Honda BF250DURA four-stroke outboard uses a 30-inch shaft for compatible high-transom boats. Its engine output supports offshore cruising and fishing, while correct shaft matching helps maintain propeller depth and predictable vessel handling.
Description
SET
Honda 250HP BF250DURA 4-Stroke Outboard Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF250DURA (Standard Rotation / Mechanical / 30" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXL: 30 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 287 kg / 633 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF250DURA
Is BF250DURA a four-stroke?
Yes. The Honda BF250DURA is a 250-horsepower four-stroke outboard with a 30-inch shaft. Its electronic fuel injection system controls fuel delivery during starting, acceleration, and cruising, while the configuration suits compatible tall-transom boats requiring a high performance outboard motor. Confirm controls, steering, battery, fuel, and package contents before installation.
What boats fit its shaft?
A boat designed for a matching 30-inch transom is the intended application. Measure the hull before purchase and follow the boat manufacturer’s shaft recommendation. Correct positioning helps maintain cooling-water pickup, gearcase depth, propeller immersion, steering response, and engine trim. Accurate measurement supports this ready to bolt marine outboard package.
What should buyers verify?
Buyers should verify horsepower suitability, transom height, engine weight, steering hardware, control equipment, battery capacity, wiring, fuel supply, and package contents. A 30-inch shaft does not guarantee universal fitment. Confirm the boat’s maximum rated horsepower and follow Honda installation documentation before repowering or operating the four-stroke powerhead.
Reviews
There are no reviews yet.