Honda 250HP BF250DK1XCRA Counter Rotation Outboard – 25″ Shaft
The 250-horsepower Honda BF250DK1XCRA provides counter-rotation operation with a 25-inch shaft for compatible twin-engine boats. Counter-rotation helps balance propulsion forces, while correct shaft length supports propeller alignment and more predictable maneuvering.
Description
SET
Honda 250HP BF250DK1XCRA Counter Rotation Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF250DK1XCRA (Counter Rotation / Mechanical / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF250DK1XCRA
Is BF250DK1XCRA counter rotating?
Yes. The Honda BF250DK1XCRA is specified as a counter-rotation 250-horsepower outboard with a 25-inch shaft. Its counter rotating lower unit is intended for compatible paired-engine applications requiring opposite propulsive rotation. Confirm engine pairing, propeller specification, controls, steering equipment, battery requirements, and boat compatibility before installation.
Does it use fuel injection?
Yes. This Honda four-stroke uses an electronic fuel injection system for controlled fuel delivery across operating conditions. Counter rotation describes the propulsion configuration rather than the fuel system. Verify mounting height, cooling-water flow, propeller requirements, paired-engine arrangement, and complete rigging before installing this high performance outboard motor.
What shaft length is specified?
The specified shaft length is 25 inches, intended for a matching tall transom. Measure the hull carefully and follow the boat manufacturer’s mounting guidance. Correct shaft depth supports cooling-water pickup, gearcase clearance, propeller immersion, steering response, and balanced twin-engine operation. Accurate fitment supports a ready to bolt marine installation.
Reviews
There are no reviews yet.