Honda 250HP BF250DK1UCDA iST Outboard – 30″ Shaft
Delivering 250 horsepower, the Honda BF250DK1UCDA iST outboard uses a 30-inch shaft for compatible transoms. Its iST electronic control supports precise operation, while the shaft length helps maintain propeller position and efficient thrust delivery.
Description
SET
Honda 250HP BF250DK1UCDA iST Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF250DK1UCDA (Counter Rotation / iST / 30" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Intelligent Shift & Throttle (iST) |
| Steering System | Electronic Remote Control / iST Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXL: 30 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 287 kg / 633 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF250DK1UCDA
Does BF250DK1UCDA use iST?
Yes. The Honda BF250DK1UCDA is specified with Intelligent Shift and Throttle and a 30-inch shaft. Its 250-horsepower four-stroke powerhead uses an electronic fuel injection system, supporting a high performance outboard motor installation when the boat has compatible electronic controls, harnesses, gauges, battery capacity, steering, and a matching tall transom.
What boats need a 30-inch shaft?
Boats with a matching 30-inch transom are the intended application for this UCDA model. Measure the hull carefully before purchase and follow the boat manufacturer’s recommendation. Correct shaft positioning supports cooling-water pickup, gearcase depth, propeller immersion, steering response, and trim. Accurate measurement is required for this ready to bolt marine outboard.
Does it require electronic controls?
Yes. The iST system requires compatible electronic controls, wiring harnesses, gauges, battery capacity, steering equipment, and correct rigging. Conventional mechanical cables may not provide the intended engine interface. Confirm complete system compatibility before purchase so the Honda 250-horsepower four-stroke powerhead delivers dependable shift and throttle response.
Reviews
There are no reviews yet.