Honda 250HP BF250DK1LRA 4-Stroke Outboard – 20″ Shaft
The 250-horsepower Honda BF250DK1LRA four-stroke outboard uses a 20-inch shaft for compatible lower-transom configurations. Its engine output supports dependable propulsion, while correct shaft length helps maintain propeller depth and efficient thrust transfer.
Description
SET
Honda 250HP BF250DK1LRA 4-Stroke Outboard Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF250DK1LRA (Standard Rotation / Mechanical / 20" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 279 kg / 615 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF250DK1LRA
Is BF250DK1LRA a four-stroke?
Yes. The Honda BF250DK1LRA is a 250-horsepower four-stroke outboard with a 20-inch shaft. Its electronic fuel injection system controls fuel delivery during starting, acceleration, and cruising, while the configuration provides a high performance outboard motor option for compatible boats. Confirm controls, steering, battery, fuel, and package contents.
What transom fits its shaft?
A 20-inch transom is the intended match for this LRA configuration. Measure the boat according to the hull manufacturer’s instructions before mounting. Correct shaft length supports cooling-water pickup, gearcase depth, propeller immersion, steering response, and engine trim. Accurate measurement supports this ready to bolt marine outboard installation.
What should buyers verify?
Buyers should verify horsepower suitability, transom height, engine weight, steering hardware, control equipment, battery capacity, wiring, fuel supply, and package contents. A 20-inch shaft does not guarantee universal fitment. Confirm the boat’s maximum rated horsepower and follow Honda installation documentation before repowering or operating the four-stroke powerhead.
Reviews
There are no reviews yet.