Honda 225HP BF225DK1XCDA iST Outboard – 25″ Shaft
The 225-horsepower Honda BF225DK1XCDA iST outboard uses a 25-inch shaft for compatible transoms. Its electronic control system supports precise throttle and shift commands, while the shaft length helps maintain propeller alignment and predictable handling.
Description
SET
Honda 225HP BF225DK1XCDA iST Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF225DK1XCDA (Counter Rotation / iST / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 225 HP (168 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Intelligent Shift & Throttle (iST) |
| Steering System | Electronic Remote Control / iST Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF225DK1XCDA
Does BF225DK1XCDA use iST?
Yes. The Honda BF225DK1XCDA is specified with Intelligent Shift and Throttle and a 25-inch shaft. Its 225-horsepower four-stroke powerhead uses an electronic fuel injection system, supporting a high performance outboard motor installation when the boat has compatible electronic controls, harnesses, gauges, battery capacity, steering, and a suitable transom.
What transom fits its shaft?
A 25-inch transom is the intended match for this XCDA model. Measure the hull carefully before purchase and follow the boat manufacturer’s recommendation. Correct shaft positioning supports cooling-water pickup, gearcase clearance, propeller immersion, steering response, and trim performance. Accurate measurement is required for this ready to bolt marine installation.
Does it require iST rigging?
Yes. The iST system requires compatible electronic controls and rigging components rather than ordinary mechanical cables at the engine. Confirm the control head, wiring harness, gauges, battery capacity, steering equipment, and installation requirements before purchase. Complete compatibility is essential for dependable shift and throttle operation.
Reviews
There are no reviews yet.