Honda 225HP BF225DK1URA 4-Stroke Outboard – 30″ Shaft
With 225 horsepower, four-stroke operation, and a 30-inch shaft, the Honda BF225DK1URA supports compatible high-transom boats. Its engine output provides substantial propulsion, while proper shaft alignment helps maintain effective thrust delivery during offshore operation.
Description
SET
Honda 225HP BF225DK1URA 4-Stroke Outboard Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF225DK1URA (Standard Rotation / Mechanical / 30" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 225 HP (168 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXL: 30 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 287 kg / 633 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF225DK1URA
Is BF225DK1URA a four-stroke?
Yes. The Honda BF225DK1URA is a 225-horsepower four-stroke outboard with a 30-inch shaft. Its electronic fuel injection system controls fuel delivery across operating conditions, while the configuration suits compatible tall-transom boats requiring a high performance outboard motor. Confirm controls, steering, battery, and package contents before installation.
What transom fits this model?
A 30-inch transom is the intended match for the BF225DK1URA. Measure the boat before purchase and follow the hull manufacturer’s shaft recommendation. Correct positioning supports cooling-water pickup, gearcase depth, propeller immersion, steering response, and engine trim. Accurate measurement supports this ready to bolt marine outboard package.
What should buyers verify?
Buyers should verify horsepower suitability, transom height, engine weight, steering hardware, controls, battery capacity, wiring, fuel supply, and package contents. A 30-inch shaft does not guarantee universal fitment. Confirm the boat’s maximum rated horsepower and follow Honda installation documentation before repowering or operating the four-stroke powerhead.
Reviews
There are no reviews yet.