Honda 200HP BF200DXCDA iST Outboard – 25″ Shaft
Featuring 200 horsepower, iST control, and a 25-inch shaft, the Honda BF200DXCDA supports compatible offshore installations. Electronic control assists precise operation, while the shaft length helps maintain propeller alignment and predictable vessel handling.
Description
SET
Honda 200HP BF200DXCDA iST Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF200DXCDA (Counter Rotation / iST / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Intelligent Shift & Throttle (iST) |
| Steering System | Electronic Remote Control / iST Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF200DXCDA
Does BF200DXCDA use iST?
Yes. The Honda BF200DXCDA is specified as an iST outboard with Intelligent Shift and Throttle and a 25-inch shaft. Its 200-horsepower four-stroke powerhead uses an electronic fuel injection system, supporting a high performance outboard motor installation when the boat has compatible electronic controls, harnesses, gauges, battery, and steering.
What shaft length does it use?
The shaft length is 25 inches, intended for a matching tall transom. Measure the hull according to the boat manufacturer’s instructions before purchase. Correct shaft positioning supports cooling-water pickup, gearcase clearance, propeller immersion, steering response, and trim performance. Proper measurement supports this ready to bolt marine outboard installation.
Does it require iST-compatible rigging?
Yes. Intelligent Shift and Throttle requires compatible electronic controls and rigging components rather than ordinary mechanical cables at the engine. Confirm the control head, harness, gauges, battery capacity, steering equipment, and installation requirements before purchase. Complete compatibility is essential for dependable shift and throttle operation.
Reviews
There are no reviews yet.