Honda 200HP BF200DK1XDA iST Outboard – 25″ Shaft
The 200-horsepower Honda BF200DK1XDA iST outboard uses a 25-inch shaft for compatible transoms. Electronic control supports precise operation, while the shaft dimension helps maintain propeller alignment and efficient thrust delivery during cruising.
Description
SET
Honda 200HP BF200DK1XDA iST Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF200DK1XDA (Standard Rotation / iST / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Intelligent Shift & Throttle (iST) |
| Steering System | Electronic Remote Control / iST Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF200DK1XDA
Does BF200DK1XDA use iST?
Yes. The Honda BF200DK1XDA uses Intelligent Shift and Throttle for compatible electronic gear selection and throttle commands. Its 200-horsepower four-stroke powerhead uses an electronic fuel injection system, while the 25-inch shaft suits tall-transom boats. Properly equipped, it functions as a high performance outboard motor for helm-controlled operation.
What transom fits its shaft?
A 25-inch transom is the intended match for this XDA configuration. Measure the hull carefully before installation and follow the boat manufacturer’s recommendation. Correct shaft selection supports cooling-water pickup, gearcase clearance, propeller immersion, steering response, and trim performance. Accurate measurement is required for this ready to bolt marine package.
Does it require electronic controls?
Yes. The iST system requires compatible electronic controls, wiring harnesses, gauges, battery capacity, steering equipment, and correct rigging. Conventional mechanical cables may not provide the intended engine interface. Confirm complete system compatibility before purchase so the Honda 200-horsepower four-stroke powerhead delivers dependable shift and throttle response.
Reviews
There are no reviews yet.