Honda 200HP BF200DK1XCRA Counter Rotation Outboard – 25″ Shaft
The 200-horsepower Honda BF200DK1XCRA provides counter-rotation operation with a 25-inch shaft for compatible twin-engine installations. Counter-rotation helps balance thrust, while the shaft length supports proper propeller alignment and predictable maneuvering.
Description
SET
Honda 200HP BF200DK1XCRA Counter Rotation Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF200DK1XCRA (Counter Rotation / Mechanical / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF200DK1XCRA
Is BF200DK1XCRA counter rotating?
Yes. The Honda BF200DK1XCRA is specified as a counter-rotation 200-horsepower outboard with a 25-inch shaft. Its counter rotating lower unit is intended for compatible paired-engine installations requiring opposite propulsive rotation. Confirm engine pairing, propeller specification, controls, steering equipment, battery requirements, and boat compatibility before installation.
Does it use fuel injection?
Yes. This Honda four-stroke uses an electronic fuel injection system for controlled fuel delivery during starting, acceleration, and cruising. Counter rotation describes the propulsion configuration rather than the fuel system. Verify the complete rigging arrangement, mounting position, cooling-water flow, and propeller requirements before installing this high performance outboard motor.
What transom fits its shaft?
A 25-inch transom is the intended match for this XCRA model. Measure the boat according to the hull manufacturer’s instructions before mounting. Correct shaft positioning supports cooling-water pickup, gearcase clearance, propeller immersion, steering response, and balanced twin-engine operation. Accurate measurement supports a ready to bolt marine installation.
Reviews
There are no reviews yet.