Honda 200HP BF200DK1LRA 4-Stroke Outboard – 20″ Shaft
The 200-horsepower Honda BF200DK1LRA four-stroke outboard uses a 20-inch shaft for compatible lower-transom configurations. Its engine output supports dependable propulsion, while correct shaft length helps maintain efficient thrust delivery and handling.
Description
SET
Honda 200HP BF200DK1LRA 4-Stroke Outboard Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF200DK1LRA (Standard Rotation / Mechanical / 20" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 279 kg / 615 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF200DK1LRA
Is BF200DK1LRA a four-stroke?
Yes. The Honda BF200DK1LRA is a 200-horsepower four-stroke outboard with a 20-inch shaft. Its electronic fuel injection system controls fuel delivery during starting, acceleration, and cruising, while the listed configuration suits compatible boats requiring a high performance outboard motor and properly matched transom installation.
What transom fits its shaft?
A 20-inch transom is the intended match for this LRA configuration. Measure the boat according to the hull manufacturer’s instructions before mounting. Correct shaft length supports cooling-water pickup, gearcase depth, propeller immersion, steering response, and engine trim. Accurate measurement is essential for this ready to bolt marine outboard installation.
Does it use remote controls?
Yes. The BF200DK1LRA listing specifies remote mechanical controls and electric start. Installation requires compatible steering hardware, shift and throttle cables, control-box components, battery connections, and a structurally sound transom. Verify rigging compatibility before operating the Honda 200-horsepower four-stroke powerhead from the helm.
Reviews
There are no reviews yet.