Honda 105HP BF150DJRA Jet Drive Outboard – 20″ Shaft
Listed at 105 horsepower, the Honda BF150DJRA uses jet-drive propulsion and a 20-inch shaft. Jet drive reduces exposed propeller hardware, supporting shallow-water operation, while proper shaft matching helps maintain water intake and steering alignment.
Description
SET
Honda 105HP BF150DJRA Jet Drive Outboard Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF150DJRA (Jet Drive / Mechanical / 20" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke DOHC 16-Valve Inline 4 (VTEC) |
| Horsepower Output (HP / kW) | 105 HP at Pump Jet (77 kW) |
| Displacement (cc / cu in) | 2354 cc (144 cu in) |
| Bore x Stroke (mm / in) | 87.0 x 99.0 mm (3.43 x 3.90 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | Jet Pump Drive Unit (Forward - Neutral - Reverse Jet Nozzle) |
| Exhaust System | Above Water Jet Pump Exhaust |
| Recommended Transom Shaft Length | L: 20 inches (Jet Pump Equivalent) |
| Alternator / Charging Output (Amps / Watts) | 40 Amp (Total / 30 Amp Battery Charging) / 480 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 178 kg / 392 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF150DJRA
Is BF150DJRA a jet drive?
Yes. The Honda BF150DJRA uses a jet-drive unit rather than a conventional propeller lower unit. Water is drawn into the intake and expelled through a steering nozzle, reducing exposed underwater hardware for suitable shallow-water applications. It remains a 150-horsepower four-stroke outboard with an electronic fuel injection system and remote mechanical controls.
Does the jet drive use a propeller?
No. A jet-drive outboard does not use an external propeller for propulsion. Its pump, impeller, intake, and nozzle generate thrust and directional control. Operators must still protect the intake from sand, gravel, weeds, and debris, because restricted flow can reduce thrust and damage internal jet-drive components.
What boats suit its 20-inch shaft?
A 20-inch transom is the specified fit for this BF150DJRA configuration. Measure the boat’s transom before installation and confirm clearance around the jet intake and steering hardware. Proper mounting height is essential for water flow, cooling, thrust delivery, and control. This package is a ready to bolt marine solution only when matched correctly.
Reviews
There are no reviews yet.