Shop
Showing 1–20 of 29 results
Lewmar CPX1 Vertical Windlass 12v Gypsy Only – 1/4″ G40 Chain 1/2″ Line
Compact ground-tackle systems can benefit from the Lewmar CPX1, a 12-volt vertical windlass designed for 1/4-inch G40 chain and 1/2-inch line. Its gypsy-only arrangement provides powered retrieval with compatible rode engagement, reducing crew exertion during anchoring on appropriately equipped boats.
Lewmar CPX2 12v Gypsy & Drum – 3/8″ Chain 5/8″ Line
The 12-volt Lewmar CPX2 combines a gypsy and drum for 3/8-inch chain and 5/8-inch line. This dual-purpose configuration supports powered chain retrieval and additional rope handling, helping crews manage anchoring and line-control tasks through one integrated windlass assembly.
Lewmar CPX2 12V Gypsy Only – 5/16″ G4 Chain 9/16″ Line
Matching the rode correctly, the Lewmar CPX2 handles 5/16-inch G4 chain and 9/16-inch line through its 12-volt gypsy-only design. Consistent chain engagement supports smoother retrieval, while electrical operation takes much of the strain out of anchoring and helps crews maintain better control over the rode.
Lewmar CPX3 12v Gypsy Only – 3/8″ Chain 5/8″ Line
Designed around larger ground tackle, the Lewmar CPX3 accepts 3/8-inch chain and 5/8-inch line in a 12-volt gypsy-only configuration. The specified rode pairing promotes reliable engagement during recovery, giving boat owners a more controlled way to raise the anchor without relying on manual hauling.
Lewmar CPX3 Vertical Windlass 12v Gypsy & Drum – 5/16″ G4 Chain 9/16″ Line
For mixed chain and rope handling, the Lewmar CPX3 combines a 12-volt vertical drive with both a gypsy and drum. It is configured for 5/16-inch G4 chain and 9/16-inch line, allowing powered anchor recovery and additional rope management from one bow-mounted system.
Lewmar CRW400 Windlass
Built for powered anchor handling, the Lewmar CRW400 supports controlled windlass operation from the bow. Its dedicated design helps reduce manual rode recovery and makes routine anchoring more manageable, allowing boat owners to deploy and retrieve compatible ground tackle with greater consistency.
Lewmar H2G Windlass (Gypsy) 12v 8mm – For Boats Up to 48 Ft., Max Pull: 1433 lbs.
The 12-volt Lewmar H2G uses an 8-millimeter gypsy and delivers a 1,433-pound maximum pull for boats up to 48 feet. Its gypsy-only arrangement focuses power on anchor rode recovery, helping operators maintain controlled retrieval while reducing the physical work required to raise ground tackle.
Lewmar H2GD Windlass (Gypsy / Drum) 8mm 12v – For Boats Up to 48 Ft., Max Pull: 1433 lbs.
Combining a gypsy and drum, the Lewmar H2GD operates at 12 volts with 8-millimeter compatibility and a 1,433-pound maximum pull. Designed for boats up to 48 feet, it supports powered anchor recovery alongside rope handling, giving crews greater flexibility during bow-side anchoring tasks.
Lewmar H3G Windlass (Gypsy) 12v RC8MM – For Boats Up to 55 Ft., Max Pull: 1962 lbs.
For boats up to 55 feet, the Lewmar H3G provides a 12-volt gypsy windlass with RC8MM compatibility and 1,962 pounds of maximum pull. The system is suited to controlled chain retrieval, helping crews handle larger ground tackle with powered assistance and greater operational consistency.
Lewmar H3GD Windlass (Gypsy / Drum) 12v RC8MM – For Boats Up To 48 ft, Max Pull: 1962 lbs
Built for vessels up to 48 feet, the Lewmar H3GD combines a gypsy and drum with 12-volt operation and RC8MM compatibility. Its 1,962-pound maximum pull supports substantial anchor recovery, while the drum adds rope-handling capability for more versatile bow operations and reduced manual workload.
Lewmar Pro 1000H Windlass (Gypsy) – For Boats 20 to 45 ft. Max Pull: 1000 lbs.
For boats from 20 to 45 feet, the Lewmar Pro 1000H delivers a maximum pull of 1,000 pounds through its gypsy configuration. The powered system helps recover the anchor with more consistent force, reducing manual hauling and giving operators improved control during anchoring and retrieval operations.
Lewmar Pro Sport 550 12V, 1/4″ Gypsy
Configured with a 1/4-inch gypsy and 12-volt operation, the Lewmar Pro Sport 550 supports powered anchor retrieval for compatible chain systems. Its compact windlass format helps smaller boats manage ground tackle with less manual effort and improved control during deployment and recovery.
Lewmar Pro Sport 550 Windlass (Gypsy) – 1/4″ G4 1/2 Line – For Boats Up to 28 Ft., Max Pull: 550 lbs
Designed for boats up to 28 feet, the Lewmar Pro Sport 550 handles 1/4-inch G4 chain and 1/2-inch line with a 550-pound maximum pull. Its gypsy configuration supports controlled anchor retrieval, helping smaller crews manage ground tackle efficiently while limiting physical strain at the bow.
Lewmar Profish 1000 Free Fall Windlass 9/16″LINE 5/16″ G4
For quick anchor deployment, the Lewmar Profish 1000 uses a free-fall design compatible with 5/16-inch G4 chain and 9/16-inch line. Powered retrieval brings the rode back under controlled operation, helping boaters shorten anchoring procedures and limit the physical effort required during repeated deployment and recovery.
Lewmar Profish 700 Free Fall Windlass with Rocker & Contactor
At the bow, the Lewmar Profish 700 pairs free-fall deployment with a rocker switch and contactor. Operators can release the anchor quickly, then use powered retrieval for recovery. This arrangement simplifies control from the helm or foredeck and reduces the manual handling required when managing ground tackle.
Lewmar Replacement Motor For V700 and Sprint 600
Designed for V700 and Sprint 600 systems, the Lewmar Replacement Motor restores powered windlass operation when the original motor requires replacement. Using the specified replacement component helps maintain compatible equipment performance and reduces installation uncertainty compared with fitting an unapproved motor assembly.
Lewmar V1 Vertical Windlass (Gypsy)
The Lewmar V1 provides vertical gypsy operation for powered anchor handling on compatible boat installations. Its focused configuration supports controlled rode retrieval and deployment, helping boat owners reduce manual hauling and manage anchoring tasks more efficiently when the windlass is correctly matched to the vessel.
Lewmar V2G Vertical Windlass (Gypsy) – For Boats 30 – 40 Ft., Max Pull: 650 lbs.
The Lewmar V2G is a vertical gypsy windlass for boats from 30 to 40 feet, with a listed maximum pull of 650 pounds. Its gypsy-only design supports powered anchor retrieval, helping crews control compatible ground tackle while reducing the effort needed at the bow.
Lewmar V2G Vertical Windlass Gypsy Only 5/16 G4 & 1/2 – For Boats 30 – 40 Ft., Max. Pull: 1433 lbs
The Lewmar V2G is a vertical windlass with a gypsy-only configuration for boats measuring 30–40 feet. It is designed for 5/16-inch G4 chain and 1/2-inch rope. With a maximum pull of 1,433 pounds, it supports controlled anchor retrieval and deployment, improving anchoring efficiency while reducing manual workload for the crew.
Lewmar V2GD Vertical Windlass (Gypsy / Drum) – For Boats Up To 40 Ft., Pulling Power: 1433 lbs.
Designed for boats up to 40 feet, the Lewmar V2GD combines a vertical gypsy and drum with 1,433 pounds of pulling power. This arrangement supports powered chain recovery plus additional rope handling, helping operators manage anchor deployment and retrieval with less manual intervention.