SI-TEX SRA-1 Rudder Indicator f/Use w/SP70 80
The SI-TEX SRA-1 Rudder Indicator is designed for use with SP70 and SP80 systems. By displaying rudder position, it helps operators understand steering response at a glance, supporting more informed course adjustments and improved awareness during autopilot operation.
SI-TEX SRA-1 Rudder Indicator Specifications
| Drive Type | Analog Rudder Angle Indicator |
| Pump/Ram Capacity | N/A (Display Unit) |
| Flow Rate / Speed | Real-Time Mechanical Position |
| Max Pressure | Electronic Signal Level |
| Cylinder Compatibility | Use w/ SP70, SP80, SP110 Systems |
| Operating Voltage | 12V DC (via Control Head) |
| Peak Current Draw | Low-Draw LED Lighting |
| Average Power Draw | Minimal Logic Power |
| Motor Type | Precision Needle Movement |
| Computer Compatibility | SI-TEX SP-Series Autopilots |
| Port Size / Thread | Direct Connection to Processor |
| Drive Connection | Hard-Wired Interface |
| Rotation/Stroke Direction | +/- 45 Degree Analog Sweep |
| Mounting Type | Dash/Console Flush Mount |
| Housing Material | UV-Stabilized High Impact ABS |
| Waterproof Rating | IP56 Front Panel Protection |
| Operating Temperature | -10°C to +55°C Marine Grade |
| Length (Overall) | 110 mm Round Bezel |
| Width/Diameter | 85 mm (3.3") Cutout Diameter |
| Weight | 0.4 kg (0.9 lbs) |
| Included Accessories | Mounting Bracket, Backlight Bulb |
| Key Mechanical Feature | High-visibility backlit analog dial |
Common Question of SI-TEX SRA-1
What is the SRA-1 indicator?
The SI-TEX SRA-1 is a rudder indicator intended for use with SP70 and SP80 autopilot systems. It displays steering position rather than operating a drive or windlass. Confirm connection type, system compatibility, mounting, wiring, power supply, and marine autopilot controller requirements before installation.
Does it work with SP70 and SP80?
Yes. The listing identifies compatibility with SP70 and SP80 systems. Verify the exact system version, wiring, connector arrangement, calibration, rudder-feedback source, power supply, and display requirements before commissioning.
Does it control an anchor?
No. The SRA-1 indicates rudder position and does not operate a gypsy, drum, chain motor, or anchor rope. It is not an anchor windlass component. Use separate controls for marine anchor retrieval.
You must be logged in to post a review.






Reviews
There are no reviews yet.