Tohatsu 225HP BFT225DXCRA Counter Rotation Outboard – 25″ Shaft
The 225-horsepower Tohatsu BFT225DXCRA provides counter-rotation operation with a 25-inch shaft. Balanced propulsion helps improve twin-engine handling, while proper shaft matching supports propeller alignment and effective thrust delivery during cruising and maneuvering.
Description
SET
Tohatsu 225HP BFT225DXCRA Counter Rotation Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT225DXCRA (Counter Rotation / Mechanical / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 225 HP (168 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT225DXCRA
Is BFT225DXCRA counter rotating?
Yes. The Tohatsu BFT225DXCRA is specified as a counter-rotation 225-horsepower outboard with a 25-inch shaft. Its counter rotating lower unit is intended for compatible paired-engine applications. Confirm propeller specification, engine pairing, controls, steering equipment, battery requirements, and boat compatibility before installing this high performance outboard motor.
What transom fits its shaft?
A 25-inch transom is the intended match for this DXCRA model. Measure the hull according to Tohatsu’s instructions before mounting. Correct shaft positioning supports cooling-water pickup, gearcase clearance, propeller immersion, steering response, and balanced twin-engine operation. Accurate measurement supports this ready to bolt marine installation.
Does it use fuel injection?
Confirm the exact fuel system before making an EFI claim. The supplied title identifies counter rotation but does not specify fuel injection. Verify fuel-system details, controls, wiring, battery, gauges, steering equipment, propeller requirements, and mounting components with Tohatsu documentation.
Reviews
There are no reviews yet.