Mercury 200HP 200L White 4-Stroke Outboard – 20″ Shaft
With 200 horsepower, white finish, four-stroke operation, and a 20-inch shaft, the Mercury 200L supports compatible lower-transom boats. Its propulsion output suits cruising and fishing, while correct shaft matching helps maintain efficient thrust delivery.
Description
SET
Mercury 200HP 200L White 4-Stroke Outboard Specs
| Brand | Mercury Marine |
| Full Model Code / Part Number | 200L White 4-Stroke (20" Shaft) |
| Country of Origin | USA |
| Engine Type & Configuration | 4-Stroke V6 (DOHC with 4-Valves per Cylinder) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3400 cc (208 cu in) |
| Bore x Stroke (mm / in) | 92.0 x 86.0 mm (3.62 x 3.38 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 5800 RPM |
| Fuel Induction System | Electronic Fuel Injection (EFI) Computer Controlled with Sequential Multi-Port |
| Ignition System | SmartCraft ECM 0d Digital Inductive |
| Starting System | Electric Start with SmartStart Push Button |
| Steering System | Electro-Hydraulic Power Steering Compatible |
| Trim & Tilt System | Smart Craft Power Trim and Tilt |
| Gear Ratio & Shift Mechanism | 1.85:1 (Forward - Neutral - Reverse) |
| Exhaust System | Through Propeller |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 85 Amp (Idle Charge Battery Management System) / 1071 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 87 Octane) / Mercury 4-Stroke Outboard Oil NMMA FC-W 25W-40 |
| Dry Weight (kg / lbs) | 216 kg / 475 lbs |
| Standard Warranty | 3 Years Limited Recreational Warranty |
Common Question of Mercury 200L White
Is the white 200L four-stroke?
Yes. The white Mercury 200L is identified as a 200-horsepower four-stroke outboard with a 20-inch shaft. Its electronic fuel injection system manages fuel delivery, while the white finish identifies exterior color. Confirm steering, controls, battery, wiring, fuel, and transom requirements before installing this high performance outboard motor.
What shaft length does it use?
The shaft length is 20 inches, intended for a matching transom height. Measure the hull before purchase because incorrect shaft length can affect cooling-water pickup, gearcase position, propeller immersion, steering response, and trim. Correct measurement supports a properly installed ready to bolt marine outboard package.
Does the white finish change performance?
No. The white finish changes exterior appearance rather than the listed horsepower or shaft length. Confirm the exact fuel system, controls, battery connections, steering equipment, engine weight, and package contents with the seller. Correct hull matching and professional rigging remain essential for dependable four-stroke operation.
Reviews
There are no reviews yet.