Honda 200HP BF200DK1XRA 4-Stroke Outboard – 25″ Shaft
The 200-horsepower Honda BF200DK1XRA four-stroke outboard uses a 25-inch shaft for compatible transoms. Its engine output provides practical propulsion, while proper shaft matching helps maintain propeller depth and efficient thrust transfer during cruising.
Description
SET
Honda 200HP BF200DK1XRA 4-Stroke Outboard Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF200DK1XRA (Standard Rotation / Mechanical / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF200DK1XRA
Is BF200DK1XRA a four-stroke?
Yes. The Honda BF200DK1XRA is a 200-horsepower four-stroke outboard with a 25-inch shaft. Its electronic fuel injection system controls fuel delivery across operating conditions, while the configuration suits compatible tall-transom boats requiring a high performance outboard motor. Confirm controls, steering, battery, and package contents before installation.
What transom fits this model?
A 25-inch transom is the intended match for the BF200DK1XRA. Measure the boat before purchase and follow the hull manufacturer’s shaft recommendation. Correct positioning supports cooling-water flow, gearcase depth, propeller immersion, steering response, and engine trim. Accurate measurements support this ready to bolt marine outboard installation.
What should buyers verify?
Buyers should verify horsepower suitability, transom height, steering hardware, control equipment, battery requirements, wiring, and package contents. A 25-inch shaft does not guarantee universal fitment. Confirm the boat’s maximum rated horsepower and follow Honda installation documentation before repowering or operating the four-stroke powerhead.
Reviews
There are no reviews yet.