Mercury 200HP 200L White DTS Outboard – 20″ Shaft
Featuring 200 horsepower, white finish, DTS controls, and a 20-inch shaft, the Mercury 200L DTS supports compatible lower-transom boats. Digital throttle and shift supports precise operation, while the shaft length promotes proper propeller placement.
Description
SET
Mercury 200HP 200L White DTS Outboard Specs
| Brand | Mercury Marine |
| Full Model Code / Part Number | 200L White DTS (20" Shaft) |
| Country of Origin | USA |
| Engine Type & Configuration | 4-Stroke V6 (DOHC with 4-Valves per Cylinder) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3400 cc (208 cu in) |
| Bore x Stroke (mm / in) | 92.0 x 86.0 mm (3.62 x 3.38 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 5800 RPM |
| Fuel Induction System | Electronic Fuel Injection (EFI) Computer Controlled with Sequential Multi-Port |
| Ignition System | SmartCraft ECM 0d Digital Inductive |
| Starting System | Electric Start with SmartStart Push Button |
| Steering System | Electro-Hydraulic Power Steering Compatible |
| Trim & Tilt System | Smart Craft Power Trim and Tilt |
| Gear Ratio & Shift Mechanism | 1.85:1 (Forward - Neutral - Reverse) |
| Exhaust System | Through Propeller |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 85 Amp (Idle Charge Battery Management System) / 1071 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 87 Octane) / Mercury 4-Stroke Outboard Oil NMMA FC-W 25W-40 |
| Dry Weight (kg / lbs) | 216 kg / 475 lbs |
| Standard Warranty | 3 Years Limited Recreational Warranty |
Common Question of Mercury 200L White DTS
What does 200L White DTS mean?
It identifies a white Mercury 200-horsepower outboard with Digital Throttle and Shift and a 20-inch shaft. DTS requires compatible electronic controls and rigging components. Confirm the fuel system, steering, battery, wiring, gauges, transom height, and package contents before installing this high performance outboard motor on a suitable boat.
Does it require digital controls?
Yes. Digital Throttle and Shift requires compatible electronic controls, wiring harnesses, gauges, battery capacity, steering equipment, and correct rigging. Conventional mechanical cables may not provide the intended engine interface. Verify the complete DTS system before installation so throttle and gear-selection commands operate correctly from the helm.
What transom fits its shaft?
A 20-inch transom is the intended match for this white DTS model. Measure the hull according to Mercury’s instructions before mounting. Correct shaft positioning supports cooling-water pickup, gearcase depth, propeller immersion, steering response, and trim. Accurate measurement supports a ready to bolt marine outboard installation.
Reviews
There are no reviews yet.