Honda 200HP BF200DXRA White Outboard Motor – 25″ Shaft
The white 200-horsepower Honda BF200DXRA outboard motor uses a 25-inch shaft for compatible transoms. Its propulsion output supports cruising and fishing, while correct shaft length helps maintain propeller position and predictable vessel handling.
Description
SET
Honda 200HP BF200DXRA White Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF200DXRA (White / Standard Rotation / Mechanical / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 200 HP (147 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF200DXRA White
Is the white DXRA a four-stroke?
Yes. The white Honda BF200DXRA is a 200-horsepower four-stroke outboard with a 25-inch shaft. Its electronic fuel injection system controls fuel delivery during starting, acceleration, and cruising, while the white finish identifies exterior color. This configuration provides a high performance outboard motor option for compatible tall-transom boats.
What boats fit its shaft?
A boat designed for a matching 25-inch transom is the intended application. Measure the hull before installation and follow the manufacturer’s recommendation. Correct shaft positioning supports cooling-water pickup, gearcase depth, propeller immersion, steering response, and engine trim. Accurate measurements support this ready to bolt marine outboard package.
What should installation include?
Installation should be matched to the boat’s steering, control, battery, wiring, fuel, and transom requirements. Confirm the hull’s maximum horsepower, engine weight capacity, shaft length, and package contents before purchase. Professional rigging helps ensure correct mounting, cooling-water flow, control adjustment, and safe four-stroke operation.
Reviews
There are no reviews yet.