Honda 140HP BF140AK1XCDA iST Outboard – 25″ Shaft
With 140 horsepower, iST control, and a 25-inch shaft, the Honda BF140AK1XCDA supports compatible offshore installations. Electronic commands assist precise operation, while correct shaft length helps maintain propeller alignment and predictable vessel handling.
Description
SET
Honda 140HP BF140AK1XCDA iST Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF140AK1XCDA (Counter Rotation / iST / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke DOHC 16-Valve Inline 4 (VTEC) |
| Horsepower Output (HP / kW) | 140 HP (103 kW) |
| Displacement (cc / cu in) | 2354 cc (144 cu in) |
| Bore x Stroke (mm / in) | 87.0 x 99.0 mm (3.43 x 3.90 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Intelligent Shift & Throttle (iST) |
| Steering System | Electronic Remote Control / iST Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.14:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 40 Amp (Total / 30 Amp Battery Charging) / 480 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 225 kg / 496 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF140AK1XCDA
What does counter rotation mean?
Counter rotation means the propulsive unit is configured to rotate opposite a standard rotation unit in a paired installation. The BF140AK1XCDA also uses iST controls, electric start, and a 25-inch shaft. Its counter rotating lower unit can help balance twin-engine torque, but compatibility must be confirmed for the boat.
Does it use electronic fuel injection?
Yes. The BF140AK1XCDA uses an electronic fuel injection system within its 140-horsepower four-stroke powerhead. Its iST controls electronically manage compatible shift and throttle functions, while electric start supports convenient operation. Verify the counter-rotation requirement, control system, harnesses, battery, gauges, steering, and mounting position before installation.
What transom fits the shaft?
A 25-inch transom is the intended fit for this XCDA configuration. Measure the hull carefully and follow the boat manufacturer’s recommendation. Correct shaft placement supports cooling-water pickup, gearcase clearance, steering control, and proper counter-rotation performance. This is a ready to bolt marine package only when correctly matched.
Reviews
There are no reviews yet.