Maxwell HRC-6 Free Fall 12v Horizontal Windlass for 1/4″ Chain & 1/2″ Line
The 12-volt Maxwell HRC-6 free-fall horizontal windlass is designed for 1/4-inch chain and 1/2-inch line. Free-fall deployment allows rapid anchor release, while powered recovery helps bring the rode aboard with less manual effort and more consistent control during anchoring operations.
Description
SET
Maxwell HRC-6 Free Fall Specs
| Brand | Maxwell |
| Full Model Code / Part Number | HRC-6 Free Fall (P104380) |
| Country of Origin | New Zealand |
| Windlass Type / Orientation | Horizontal, Free Fall |
| Power Supply / Drive System | 12V DC |
| Motor Wattage / Rating | 600W |
| Maximum Pull / Breakaway Power | 410 kg / 900 lbs |
| Working Load / Continuous Pull | 100 kg / 220 lbs |
| Max Retrieval Speed | 33 m/min (108 ft/min) |
| Chain Gypsy Size & Standard | 1/4" (6mm/7mm) Short Link / HT |
| Rope Size Capability | 1/2" (12 mm) 8-Plait or 3-Strand |
| Capstan / Drum Option | No |
| Material & Finish | Pressure Coated Marine-Grade Die-Cast Aluminum |
| Current Draw / Circuit Breaker Rating | 80 Amps |
| Deck Thickness Range | 20 - 40 mm |
| Net Weight | 8.5 kg / 18.7 lbs |
| Included Switchgear / Control System | Dual Direction Solenoid, Circuit Breaker, Rocker Switch |
| IP Rating | IP66 |
| Standard Warranty | 3 Years |
| Application | Boats up to 9m (30ft), max displacement 4,000 kg, target anchor weight up to 10 kg |
Common Question of Maxwell HRC6
What chain and line fit HRC-6?
The Maxwell HRC-6 is listed for 1/4-inch chain and 1/2-inch line. Confirm chain grade, link profile, rope construction, splice, battery capacity, breaker rating, deck hardware, and anchor rode compatibility before installation. Correct dimensions support reliable marine anchor retrieval.
Does it have free fall?
Yes. The HRC-6 is identified as a free-fall horizontal windlass. Confirm clutch adjustment, brake operation, control wiring, chain stopper use, deck clearance, and recovery procedures before deployment. Free-fall capability does not remove the need for safe electric anchor windlass operation.
What voltage does it use?
The Maxwell HRC-6 is specified as a 12V windlass. Confirm battery capacity, cable gauge, circuit breaker, switch arrangement, grounding, and motor current before wiring. Correct electrical protection supports dependable operation during anchor deployment and recovery.
Reviews
There are no reviews yet.