Maxwell HRC10-10 Free Fall 12v Horizontal Windlass for 3/8″ Chain & 5/8″ Line
The 12-volt Maxwell HRC10-10 handles 3/8-inch chain and 5/8-inch line in a free-fall horizontal configuration. Rapid anchor release simplifies deployment, while powered retrieval helps crews recover heavier compatible rode with improved control and less reliance on manual hauling.
Description
SET
Maxwell HRC10-10 Free Fall Specs
| Brand | Maxwell |
| Full Model Code / Part Number | HRC10-10 Free Fall (P104008) |
| Country of Origin | New Zealand |
| Windlass Type / Orientation | Horizontal, Free Fall |
| Power Supply / Drive System | 12V DC |
| Motor Wattage / Rating | 1000W |
| Maximum Pull / Breakaway Power | 850 kg / 1870 lbs |
| Working Load / Continuous Pull | 250 kg / 550 lbs |
| Max Retrieval Speed | 24 m/min (79 ft/min) |
| Chain Gypsy Size & Standard | 3/8" (10mm) Short Link / HT |
| Rope Size Capability | 5/8" (16 mm) 8-Plait or 3-Strand |
| Capstan / Drum Option | No |
| Material & Finish | Hard Anodized & Powder Coated Marine Alloy |
| Current Draw / Circuit Breaker Rating | 135 Amps |
| Deck Thickness Range | 25 - 60 mm |
| Net Weight | 20 kg / 44 lbs |
| Included Switchgear / Control System | Dual Direction Solenoid, Free Fall Emergency Clutch Handle |
| IP Rating | IP66 |
| Standard Warranty | 3 Years |
| Application | Boats from 11m to 14m (36ft - 46ft), max displacement 11,000 kg, target anchor weight up to 25 kg |
Common Question of Maxwell HRC10-10
What chain and line fit HRC10-10?
The Maxwell HRC10-10 is listed for 3/8-inch chain and 5/8-inch line. Confirm chain grade, link profile, rope construction, splice, battery capacity, breaker rating, deck hardware, and anchor rode compatibility before installation. Correct sizing supports dependable marine anchor retrieval.
Does it have free fall?
Yes. The HRC10-10 is identified as a 12V free-fall horizontal windlass. Confirm clutch adjustment, brake operation, control wiring, chain stopper use, deck clearance, and retrieval procedures before deployment. Free-fall capability does not replace correct electrical protection or safe operation.
What voltage does it use?
The Maxwell HRC10-10 is specified as a 12V windlass. Confirm battery capacity, cable gauge, circuit breaker, switch arrangement, grounding, and motor current requirements before wiring. Correct electrical installation supports dependable operation of this electric anchor windlass.
Reviews
There are no reviews yet.