Maxwell RC8-6 Vertical 12v Windlass for 1/4″ Chain & 1/2″ Line
Configured for 1/4-inch chain and 1/2-inch line, the Maxwell RC8-6 provides 12-volt vertical windlass operation. Its matched rode capacity supports dependable engagement during retrieval, helping crews deploy and recover the anchor with less manual hauling and more consistent control from the bow.
Description
SET
Maxwell RC8-6 Specs
| Brand | Maxwell |
| Full Model Code / Part Number | RC8-6 Low Profile (P102982) |
| Country of Origin | New Zealand |
| Windlass Type / Orientation | Vertical, Low Profile |
| Power Supply / Drive System | 12V DC |
| Motor Wattage / Rating | 600W |
| Maximum Pull / Breakaway Power | 350 kg / 770 lbs |
| Working Load / Continuous Pull | 115 kg / 253 lbs |
| Max Retrieval Speed | 28 m/min (92 ft/min) |
| Chain Gypsy Size & Standard | 1/4" (6mm/7mm) Short Link / HT |
| Rope Size Capability | 1/2" (12 mm) 8-Plait or 3-Strand |
| Capstan / Drum Option | No |
| Material & Finish | Chrome Marine-Grade Bronze |
| Current Draw / Circuit Breaker Rating | 80 Amps |
| Deck Thickness Range | 25 - 65 mm |
| Net Weight | 13.5 kg / 29.7 lbs |
| Included Switchgear / Control System | Dual Direction Solenoid, Emergency Clutch Handle |
| IP Rating | IP66 |
| Standard Warranty | 3 Years |
| Application | Boats from 7.5m to 10.5m (24ft - 34ft), max displacement 5,000 kg, target anchor weight up to 13 kg |
Common Question of Maxwell RC8-6
What chain and line fit?
The Maxwell RC8-6 is listed for 1/4-inch chain and 1/2-inch line. Confirm chain grade, link profile, rope construction, splice, battery capacity, breaker rating, deck hardware, and anchor rode compatibility before installation for reliable marine anchor retrieval.
Is it a 12-volt windlass?
Yes. The Maxwell RC8-6 is specified as a vertical 12V windlass. Confirm battery capacity, cable gauge, circuit breaker, switch arrangement, grounding, motor current, and control wiring before installation. Correct electrical protection supports dependable operation of this electric anchor windlass.
What transom or deck fits?
A properly reinforced windlass deck is required rather than a specific transom size. Verify deck thickness, chain fall, locker clearance, mounting footprint, motor access, rode alignment, and anchor weight before purchase. Correct installation supports safe and consistent operation.
Reviews
There are no reviews yet.