Yamaha 250HP F250ESB2 White DEC Outboard – 35″ Shaft
The white 250-horsepower Yamaha F250ESB2 DEC outboard uses a 35-inch shaft for compatible high-transom configurations. Electronic controls support responsive operation, while the engine’s output provides practical propulsion for offshore cruising, fishing, and utility applications.
Description
SET
Yamaha 250HP F250ESB2 White DEC Outboard Specs
| Brand | Yamaha Marine |
| Full Model Code / Part Number | F250ESB2 (White / Standard Rotation / 35" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke V6 (DOHC 24-Valve with VCT) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 4169 cc (254 cu in) |
| Bore x Stroke (mm / in) | 96.0 x 96.0 mm (3.78 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Electronic Fuel Injection (EFI) - V6 VST |
| Ignition System | TCI Microcomputer |
| Starting System | Electric Start (Digital Electronic Control) |
| Steering System | Integrated Digital Electronic Steering (DES) / DEC |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.75:1 (Forward - Neutral - Reverse) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXXL: 35 inches |
| Alternator / Charging Output (Amps / Watts) | 70 Amp (Maximum) / 840 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 89 Octane Recommended) / Yamalube 4M FC-W 10W-30 |
| Dry Weight (kg / lbs) | 265 kg / 584 lbs |
| Standard Warranty | 3 Years Limited Pleasure Boat Warranty |
Common Question of Yamaha F250ESB2 White
Is the white F250ESB2 DEC?
Yes. The white Yamaha F250ESB2 is identified with DEC Digital Electronic Control and a 35-inch shaft. The white finish identifies exterior color, while exact controls and fuel system require confirmation. Verify harnesses, gauges, battery, steering, transom strength, and package contents before installing this high performance outboard motor.
What shaft length does it use?
The shaft length is 35 inches, intended for a matching extra-tall transom. Measure the boat according to Yamaha’s instructions before mounting because incorrect shaft length can affect cooling-water pickup, gearcase clearance, propeller immersion, steering response, and trim. Correct measurement supports this ready to bolt marine installation.
Does the white finish change performance?
No. The white finish changes exterior appearance rather than the listed horsepower or shaft length. Confirm DEC controls, wiring, gauges, battery requirements, steering equipment, fuel system, engine weight, and package contents with the seller before installation.
Reviews
There are no reviews yet.