Mercury 300HP 300L Verado Outboard – 20″ Shaft

SKU: GM64292
In Stock

The 300-horsepower Mercury 300L Verado uses a 20-inch shaft for compatible lower-transom configurations. Its Verado outboard platform supports strong propulsion, while the shaft length helps maintain effective propeller placement and thrust delivery during cruising.

$17,824.00
In Stock
Add to wishlist
    Category: Brand:

    Description

    SET

    Mercury 300HP 300L Verado Outboard Specs

    BrandMercury Marine
    Full Model Code / Part Number300L Verado (20" Shaft)
    Country of OriginUSA
    Engine Type & Configuration4-Stroke Inline 6 (Supercharged with Verado SmartCraft)
    Horsepower Output (HP / kW)300 HP (221 kW)
    Displacement (cc / cu in)2600 cc (158 cu in)
    Bore x Stroke (mm / in)82.0 x 82.0 mm (3.23 x 3.23 in)
    Maximum RPM Range (Full Throttle Operating Range)5800 - 6400 RPM
    Fuel Induction SystemSequential Multi-Port Electronic Fuel Injection (EFI) with Supercharger
    Ignition SystemSmartCraft ECM 0d Digital Inductive
    Starting SystemElectric Start with SmartStart Push Button
    Steering SystemElectro-Hydraulic Power Steering
    Trim & Tilt SystemSmart Craft Power Trim and Tilt
    Gear Ratio & Shift Mechanism1.85:1 (Forward - Neutral - Reverse)
    Exhaust SystemThrough Propeller
    Recommended Transom Shaft LengthL: 20 inches
    Alternator / Charging Output (Amps / Watts)70 Amp (Idle Charge Battery Management System) / 882 Watts
    Recommended Fuel Grade & Oil TypeRegular Unleaded (Min. 87 Octane) / Mercury 4-Stroke Outboard Oil NMMA FC-W 25W-40
    Dry Weight (kg / lbs)268 kg / 600 lbs
    Standard Warranty3 Years Limited Recreational Warranty

    Common Question of Mercury 300L Verado

    Is the 300L Verado fuel injected?

    Yes. The Mercury 300L Verado uses an electronic fuel injection system within its applicable four-stroke powerhead. Its 20-inch shaft suits a matching transom, while Verado controls, steering, battery, wiring, and gauges require compatibility. Verify package contents before installing this high performance outboard motor.

    What transom fits its shaft?

    A 20-inch transom is the intended match for this 300L Verado model. Measure the boat before purchase because incorrect shaft length can affect cooling-water pickup, gearcase depth, propeller immersion, steering response, and trim. Correct measurement supports a properly fitted ready to bolt marine outboard package.

    What should buyers verify?

    Verify engine weight, maximum horsepower, transom strength, shaft length, Verado controls, steering hardware, battery capacity, wiring, fuel supply, gauges, and package contents. Confirm Mercury’s installation requirements before repowering, because the 20-inch shaft and electronic systems must match the boat’s structure and rigging.

    Reviews

    There are no reviews yet.

    Be the first to review “Mercury 300HP 300L Verado Outboard – 20″ Shaft”

    Your email address will not be published. Required fields are marked *

    Log in

    You dont have an account yet? Register Now

    Search

    Categories

    Your Cart