Mercury 250HP 250L Verado Outboard – 20″ Shaft
The 250-horsepower Mercury 250L Verado uses a 20-inch shaft for compatible lower-transom boats. Its Verado outboard platform provides substantial propulsion, while correct shaft matching helps maintain propeller depth and predictable handling during cruising.
Description
SET
Mercury 250HP 250L Verado Outboard Specs
| Brand | Mercury Marine |
| Full Model Code / Part Number | 250L Verado (20" Shaft) |
| Country of Origin | USA |
| Engine Type & Configuration | 4-Stroke Inline 6 (Supercharged with Verado SmartCraft) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 2600 cc (158 cu in) |
| Bore x Stroke (mm / in) | 82.0 x 82.0 mm (3.23 x 3.23 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5800 - 6400 RPM |
| Fuel Induction System | Sequential Multi-Port Electronic Fuel Injection (EFI) with Supercharger |
| Ignition System | SmartCraft ECM 0d Digital Inductive |
| Starting System | Electric Start with SmartStart Push Button |
| Steering System | Electro-Hydraulic Power Steering |
| Trim & Tilt System | Smart Craft Power Trim and Tilt |
| Gear Ratio & Shift Mechanism | 1.85:1 (Forward - Neutral - Reverse) |
| Exhaust System | Through Propeller |
| Recommended Transom Shaft Length | L: 20 inches |
| Alternator / Charging Output (Amps / Watts) | 70 Amp (Idle Charge Battery Management System) / 882 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 87 Octane) / Mercury 4-Stroke Outboard Oil NMMA FC-W 25W-40 |
| Dry Weight (kg / lbs) | 268 kg / 600 lbs |
| Standard Warranty | 3 Years Limited Recreational Warranty |
Common Question of Mercury 250L Verado
Is the 250L Verado fuel injected?
Yes. The Mercury 250L Verado uses an electronic fuel injection system within its applicable four-stroke powerhead. Its 20-inch shaft suits a matching transom, while the Verado configuration requires compatible controls, steering, battery, wiring, and gauges. Verify package contents before installing this high performance outboard motor.
What transom fits its shaft?
A 20-inch transom is the intended match for this 250L Verado model. Measure the boat before purchase because incorrect shaft length can affect cooling-water pickup, gearcase depth, propeller immersion, steering response, and trim. Accurate measurement supports a properly fitted ready to bolt marine outboard package.
What should installation include?
Installation should include compatible Verado controls, steering equipment, wiring, gauges, battery connections, fuel supply, mounting hardware, and adequate transom support. Confirm engine weight, maximum horsepower, shaft length, and package contents with the seller. Follow Mercury documentation for final rigging and safe operation.
Reviews
There are no reviews yet.