Tohatsu 250HP BFT250DXCDA DBW Counter Rotation Outboard – 25″ Shaft
Delivering 250 horsepower, the Tohatsu BFT250DXCDA provides DBW controls, counter-rotation, and a 25-inch shaft. Electronic command input supports precise operation, while counter-rotation helps balance twin-engine thrust and the shaft length suits compatible transom heights.
Description
SET
Tohatsu 250HP BFT250DXCDA DBW Counter Rotation Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT250DXCDA (Counter Rotation / DBW / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Drive by Wire (DBW) |
| Steering System | Electronic Remote Control Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT250DXCDA
Is BFT250DXCDA counter rotating?
Yes. The Tohatsu BFT250DXCDA is specified as a DBW counter-rotation 250-horsepower outboard with a 25-inch shaft. Its counter rotating lower unit is intended for compatible paired-engine applications. Confirm propeller specification, engine pairing, DBW controls, steering, battery, wiring, and boat compatibility before installation.
What does DBW provide?
DBW provides Drive-by-Wire electronic throttle and shift commands for compatible controls. It requires matching control equipment, harnesses, gauges, battery capacity, steering components, and correct rigging. Verify the complete system before installation so the counter-rotation engine operates properly as a high performance outboard motor.
What shaft length does it use?
The shaft length is 25 inches, intended for a matching tall transom. Measure the hull before purchase because incorrect shaft length can affect cooling-water pickup, gearcase clearance, propeller immersion, steering response, and paired-engine balance. Accurate measurement supports this ready to bolt marine installation.
Reviews
There are no reviews yet.