Tohatsu 250HP BFT250DUCDA DBW Counter Rotation Outboard – 30″ Shaft
The 250-horsepower Tohatsu BFT250DUCDA provides DBW controls, counter-rotation, and a 30-inch shaft. Electronic operation supports precise commands, while counter-rotation helps balance twin-engine thrust and the shaft dimension suits compatible high-transom boats.
Description
SET
Tohatsu 250HP BFT250DUCDA DBW Counter Rotation Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT250DUCDA (Counter Rotation / DBW / 30" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Drive by Wire (DBW) |
| Steering System | Electronic Remote Control Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXL: 30 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 287 kg / 633 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT250DUCDA
Is BFT250DUCDA counter rotating?
Yes. The Tohatsu BFT250DUCDA is specified as a DBW counter-rotation 250-horsepower outboard with a 30-inch shaft. Its counter rotating lower unit is intended for compatible paired-engine applications. Confirm propeller specification, engine pairing, DBW controls, steering, battery, wiring, and boat compatibility before installation.
What does DBW mean?
DBW means Drive-by-Wire, using electronic commands for compatible throttle and shift functions rather than conventional mechanical cables at the engine. Confirm control compatibility, harnesses, gauges, battery capacity, steering equipment, and programming requirements before installation of this high performance outboard motor configuration.
What transom fits its shaft?
A 30-inch transom is the intended match for this DUCDA model. Measure the hull according to Tohatsu’s instructions before mounting because incorrect shaft length can affect cooling-water pickup, gearcase clearance, propeller immersion, steering response, and paired-engine balance. Accurate measurement supports a ready to bolt marine installation.
Reviews
There are no reviews yet.