Honda 225HP BF225DK1XCDA White iST Outboard – 25″ Shaft
Featuring 225 horsepower, white finish, iST control, and a 25-inch shaft, the Honda BF225DK1XCDA supports compatible transom installations. Electronic operation assists precise throttle and shift commands, while the shaft length promotes proper propeller alignment and thrust delivery.
Description
SET
Honda 225HP BF225DK1XCDA White iST Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF225DK1XCDA (White / Counter Rotation / iST / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 225 HP (168 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Intelligent Shift & Throttle (iST) |
| Steering System | Electronic Remote Control / iST Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF225DK1XCDA White
Is the white XCDA an iST model?
Yes. The white Honda BF225DK1XCDA retains the iST Intelligent Shift and Throttle configuration and a 25-inch shaft. Its 225-horsepower four-stroke powerhead uses an electronic fuel injection system. The white finish identifies exterior appearance, while compatible rigging is required for this high performance outboard motor installation.
What does the white finish change?
It changes the outboard’s exterior appearance. The white model retains the listed 225-horsepower configuration, iST system, and 25-inch shaft. Confirm package contents with the seller, including controls, harnesses, gauges, battery requirements, steering hardware, and mounting components. Proper compatibility supports this ready to bolt marine outboard installation.
What boats need its shaft?
Boats with a matching 25-inch transom are the intended application. Verify the hull’s actual transom height and maximum horsepower before mounting. Correct shaft depth helps maintain cooling-water pickup, gearcase clearance, propeller immersion, steering control, and efficient trim. Follow the manufacturer’s measurement procedure for final selection.
Reviews
There are no reviews yet.