Honda 225HP BF225DK1XCRA White Counter Rotation Outboard – 25″ Shaft
Featuring 225 horsepower, a white finish, counter-rotation, and a 25-inch shaft, the Honda BF225DK1XCRA supports compatible twin-engine boats. Counter-rotation helps balance propulsion forces, while proper shaft matching supports propeller alignment and predictable handling during acceleration and maneuvering.
Description
SET
Honda 225HP BF225DK1XCRA White Counter Rotation Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF225DK1XCRA (White / Counter Rotation / Mechanical / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 225 HP (168 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Counter Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF225DK1XCRA White
Is the white XCRA counter rotating?
Yes. The white Honda BF225DK1XCRA is specified with counter rotation and a 25-inch shaft. Its counter rotating lower unit is designed for compatible paired-engine applications. The white finish identifies appearance only, while the 225-horsepower four-stroke powerhead uses an electronic fuel injection system. Verify all rigging requirements before purchase.
What transom height does it need?
A 25-inch transom is the intended match for this white XCRA model. Confirm the boat’s actual transom height before mounting because incorrect shaft length can affect cooling-water pickup, gearcase depth, propeller immersion, steering response, and twin-engine balance. Proper measurement supports this ready to bolt marine outboard installation.
Does the finish change performance?
No. The white finish changes exterior appearance rather than the listed horsepower, counter-rotation configuration, or 25-inch shaft. Confirm package contents with the seller, including controls, propeller requirements, gauges, wiring, battery connections, and steering hardware. Correct boat matching remains essential for reliable four-stroke operation.
Reviews
There are no reviews yet.